Rivers, Part 2

So, this is a basic multi-part "how I did it" for the rivers. I have a few pictures to go with, as well, though they are of different pieces.

Just to re-cap, I am using the styrene sheet rivers from a company called Precision Products [www.appliedimaginationinc.com]. The sheets are 16"square, 0.025" thick, with vacuum-formed terrain impressed into the sheets. The stream is about 1" (2.5 cm) across, with banks of about equal width.

Materials and tools: wood putty, styrene rivers, kitchen shears, hobby knife, 1/16" thick plywood, glue, felt, a few heavy books

1. Cut out the river piece. I cut mine all the way to the edge of the banks, but you could leave a small lip or flange of plastic around it. I used kitchen shears to cut them out.


2. Wash the piece in warm water with some dish detergent, just to make sure there's no mold release on it.


3. Mix the wood putty. I used to have Durham's, which I actually prefer, but the DAP brand stuff works as well. You want to mix water with the powder until it gets like a really thick milkshake consistency.


4. Fill the underside of the river piece with the wood putty and let it dry overnight.



5. Next day, trace the shape of the river out onto some thin plywood or MDF. I use 1/16 inch birch plywood (about 1.5mm), that is supposed to be for R/C airplanes or something.


6. Cut the shape out. A bandsaw with a fine-tooth blade would be perfect for this, but I don't have one, so I use my hand jigsaw (sometimes called a fret saw or jeweler's saw, I think). Sand the rough edges.


7. Glue the river piece to the base. I use Allene's Tacky Glue usually, but I have also used superglue (liquid, not gel) with good results.
   
8. Clamp or weight down the piece and leave two+ hours (PVA) or twenty-ish minutes (superglue). I have tried lots of ways to weigh it down, and I am still least happy with this step of the process. Best so far has been a layer of felt or something, then a few large heavy books on top. It still leaves a few gaps at the edges, though.


9. Spray with flat white paint. I tried black paint on one piece. It doesn't work for me. Let dry (duh!).

At this point, you should have a piece of nicely detailed river, with the hollows filled and attached to a base for a nice, weighty, durable piece of terrain.

Next post, I'll discuss painting and filling the stream with water effect.

Fields, Part 1

I have a way to make plowed fields for your troops to fight across that is just great, in my not-so-humble opinion. Its not my own idea, unfortunately, and many of you may already know how to do it, but for those of you who do not:

• Its flexible and sturdy.
• It can be about any size you reasonably could want.
• Its dead easy and quick to do.
• Materials are cheap and pretty easy to find.

What more could you ask? Oh, you want to know how to do it? Okay.

1. Buy some dark brown spray paint. I used Krylon, but you can use any of them. Gloss or flat, doesn't matter much. (Gloss looks more like a wet field, I think).


2. Buy a ridged polyfiber doormat with rubber backing, with ridges about 1/4 inch wide and 1/8 inch deep. I got mine at Target, 2' x 3', for about $3.99.


3. Using heavy scissors (I used kitchen shears), cut the mat into desired shape and size. I made small rectangles with rounded corners, approximately 4" x 6".


4. Spray the mat. Let it dry.

You are now done. If you want to make it a bit snazzier, drybrush or lightly spray a slightly lighter shade of brown over the original dark brown.

There you have it: quick and easy fields. To see the results:

http://i161.photobucket.com/albums/t225/jwomack94/Wargames%20Terrain/DSC04611.jpg

In Fields, Part 2, I'll discuss how I am making a planted field.

"A date that will live in infamy..."

The attack on Pearl Harbor (if I have my time zones right) began almost exactly 67 years ago.

All I can say to those Allied soldiers, sailors and marines who gave their lives in World War II, and those who fought and came home, is this:

THANK YOU!

We now return you to your regularly scheduled gaming blog.

New Feature - No Big deal, but...

I added a counter to the blog. I am always curious to know how much traffic my sites are getting, because I don't see a lot of point in spinning sutff off into the void we call the internet if no one is looking at it.

So, you have been weighed, measured and counted. Or something like that.

Oh, and I promise I will take some pictures of the river sections I have been working on to post this weekend. They are not finished, but you can see a little bit more of how it goes.

Later.

Pot Toppers

There has been a lot of discussion about using 'pot toppers' for terrain projects.

I first clued into them through a Yahoo terrain makers group.

Then, Tas mentioned them on his excellent VSF blog, Yours in a White Wine Sauce! [ http://pauljamesog.blogspot.com ]

So, I felt it only right that I should mention them here. I have yet to obtain any of them, although there is a Michael's craft store not a mile from my home. It is definitely in the project queue to try out, though, as it looks like it can be used to fantastic effect. To wit, check out this page: http://ardleybridge.fotopic.net/c1501517.html

If any of you have used pot toppers, please let us know your experience with them. How easy were they to work with, were you pleased with the results, what adhesive did you use - any comments would be great!

About the poll...

I usually run polls for a long time. I like to get plenty of responses to pretend its a decent sample size of the target audience.

So this one runs until one minute to midnight on New Year's Eve. I stopped it at a minute till so that the diehard geeks (you know, like me!) could step away from the Internet and go kiss their significant other at midnight. Call me a romantic.

So, let me know what you think. My vote is already cast.

Its December. Let's talk snow.

Okay, so I practically never see the stuff down here in Houston. I grew up in Dallas, and we usually got ice, not snow, pretty much every year.

I have visited the white cold stuff on a few occassions, and even spent some time figuring out how to go down a mountain covered with the crap while balanced precariously on two thin strips of wood. Why anyone would do this for fun, I don't know, but to each their own, I suppose.

The real point of this post, though, is to ask for comments on how to model snow on the gaming table.

Naturally, a large heavy white cloth could do for an entire table. But for features, how do you put snow on them? Let's assume the project is a cluster of large rocks, covered with snow, and a snowy base around them. The rocks are easy - carved and painted foam, attached to a base of either MDF or plywood, depending on what you use for snow. Trying for something kinda like this:



But what do you use? Soap flakes? Powdered sugar (ants in no time)? I bought some snow effect stuff that is designed to be used on those seasonal displays, but I haven't tried it out yet and have no idea how long it will last, etc.

So, guys and dolls, what do you recommend?