Resin Minerals Painted

I bought a pair of pieces of Armorcast's resin "Pyrite Crystals" from a local gaming shop last week, and got them painted up over the weekend. Finally had time to take a photo of them and put together a few thoughts about them, especially as compared to my previous crystal project, the green 'handwavium' ones I made of carved pink foam.

My review:

• Nice quality casting.
• Good stronge yellowish beige resin
• Very little flash or pitting
• Nice lines
• Details okay, but not fantastic. Just a clump of rock crystals.
• Super easy to paint.
• Price: $5.00

What I Did:

1. First I used a sharp hobby knife to clean up the little bits of flash, mold lines, etc.
2. Then I washed the pieces with warm soap and water, rinsed and dried with paper towel. Let it sit overnight to air dry more.
3. Next, a little bit of superglue to fill the few small bubble pits. Let sit for an hour to cure.
4. Then I sprayed each piece with flat white paint.
5. Color on the rocks was achieved by using several coats of thinned Vallejo Intense Blue. Ground color was Ceramcoat burnt sienna.
6. Brush watered PVA glue on base (using 100 for $4 cheap-o plastic bristle brush), then dredge into my Mars ground mix, and let dry.
7. Next morning, two coats fo Testor's gloss, followed in afternoon by Testor's flat.
8. Will finish by brushing on a coat of water-soluble gloss onto the crystals to make them shiny.
   

eBay Based Terrain Maker

I have bought from this guy before, and I am pretty happy with his stuff. Lots of different things, different types of terrain. I recommend it.

http://stores.ebay.com/battlefieldarchitect

The link should take you to his eBay store.

Not Dead Yet!

Really... the blog isn't dead.

It's just that I haven't done a darned thing terrain wise in a month, unless you count buying one piece on eBay and picking up a few interesting bits of plastic that were laying around.

I have found a possible source for one piece of terrain I have been wanting to buy: the Cryx Necrotite Mining Rig for Warmachine. Now, I don't actually play Warmachine, but the piece looks just about perfect for my VSF gaming universe. Necrotite is a glowing green substance, and I have this stuff I call handwavium, which is used to create a chemically induced heat source for steam power, without needing oxygen. Perfect for long space flights - pardon me, aether flights - don't you agree?

Anyway, this rig looks just right for a large experimental handwavium reactor, or maybe a power supply for a small town, fort, secret laboratory, or what have you. I'm leaning towards secret lab, myself, waht with Herr Doctor Maton running about on Mars and all.

The other development is that I have begun looking into a supplier for a custom made Martian terrain gaming mat. Theterrainguy.com looks rather promising, and I have been in email contact with him. He thinks he can match up to my hill coloration rather closely, which would be great. He's also a nice guy and a fellow Texan, so there you go.

More later this month, I promise.

Great New Product

Okay, I check out Litko's "Jim's Product Lab" from time to time, just to see what all that madman has gotten up to lately. Some of the things he creates are just too cool.

This time, I think he's outdone himself. They have a modular building line for sci-fi/modern gaming. While I don't need that kind of thing very much on the projects I am working on these days, he just did up (well, I just noticed for the first time, at any rate) a couple of different sets of stairs to be attached to the outside of some modular towers. I absolutely hate making staircases. Despise it. I make a lot of goofus ladders instead. These may change that.

Naturally, they could be attached to the outside of pretty much anything. or the inside if you were detailing the interior.

Anyway, check here to see it. Scroll down the page a little bit. You'll find them.

http://www.litkoaero.com/page/LAI/JIMSLAB

Bookmark it - you're going to want to go back again later. I know that I do.

Perfic Panels - Anyone using them?

There is a company I found showing at Historicon in 2007 called Precision Products (http://www.appliedimaginationinc.com/), that manufactures vacuum formed polystyrene sheets of terrain - I have been working on their rivers in one of my projects - and embossed sheet for model building. Things like brick and flagstone and such for the exterior of models.

They also manufacture something similar to foamcore, but with a thin styrene exterior rather than the more common (dare I say 'traditional'?) paper exterior sandwiching the foam.

Has anyone used this material? It sounds rather more sturdy than regular foamcore, what with being more water-resistant, and the fact that I tend to use water-based glues and paints makes this a definite plus.

Anyone have practical experience of the stuff? Leave a comment if you do!

Primitive Huts

Okay, these huts are just becoming available, although they have been discussed on The Miniatures Page (TMP) for over a year.

The sculptor (whose name I can't recall off the top of my head, but who goes by the TMP handle of Cacique Caribe, or CC) finished them, oh, November of 2007 I think. Then he shopped around for someone to handle the casting and marketing and such for him, as he didn't really want to do all of that himself, but there was a lot of interest in the models.

Enter Alex Bates in Alaska, of the new Forge of Ice company. They get a deal worked out, and now, they are in production.

First, a group shot. There are four different designs:

Now a close up of one:

I have nothing to do with the paint jobs (nice work, though, especially the snow) which were done I believe by a Mr Robert Phipps of the United Kingdom, a customer of Forge of Ice and friend of Alex's. I hope no one minds me swiping the photos, but I'll remove if you want me to!

I pinched this tidbit regarding the snow effect from TMP (http://theminiaturespage.com/)

"Regarding the snow effect, Rob [Phipp] says:

I Just use a bit of PVA wood glue on the bits I wanted covered in snow, then used a white flock, then another coat of PVA and then Bicarbonate of Soda for the snow effect. You get a nice brilliant crisp white from it.You don't have to use a white flock underneath but it stops any colour from the tent from showing through if your PVA is too thin.
And that's how he does it!

-Alex"

The reviews have been most complimentary, for both sculpting and quality of the production castings. You can reach Alex through his blog, and here's a link with more info and pictures of the tents. http://forum54.oli.us/index.php?topic=5205.15

Battlefield Architects

This fellow does some really nice work. I have bought from him on eBay more than once, and I recommend his stuff. It looks nice and is quite sturdy.

http://stores.ebay.com/Battlefield-Architect_W0QQssPageNameZstrkQ3amedwxQ3amesstQQtZkm

That's the eBay store link.

Rivers Project

[Carried over from my defunct Napoleonics blog]

[Originally posted Saturday, September 27, 2008]

I started a new terrain project last night, one that has been sitting in the Closet for more than a year. I bought some styrene sheets last year at Historicon from a company called Precision Products [www.appliedimaginationinc.com]. These sheets are 16"square, 0.025" thick, with vacuum-formed terrain impressed into the sheets. The two sheets I bought are 1" Straight Rivers [SKU 16091] and 1" River bends [SKU 16092]. The Straight Rivers has four lengths of straight river, each approximately 15" in length. The River Bends includes:

2 x 45 degree bends
2 x 90 degree bends
3 x Y-Junctions, and
1 x Wooden Bridge

I have cut out two pieces so far, the bridge and one 90 degree bend. Yesterday I filled the styrene hollows with DAP Water Putty to prevent it from crushing or flexing, and then glued each piece to a 1/16" plywood base. Late last night I primed the two pieces with flat white spray paint, the cheap stuff from WalMart. Today, I applied basecoat colors, using cheap craft paints. Sorry about the blurry picture, I was hurrying.

So far, I am pretty pleased with the results. The water putty has added some heft and rigidity, as has the plywood base. It is taking the paint really well, too.

I will be adding a link to all the photos to the margin tonight. I'll post more when I make some more progress.

Still to come:
Drybrushing for detail
Add flock and ballast
Pour scenic water into riverbanks
Build a hand rail. The only drawback is that the piece will lose its scale-neutrality if I do that.