Modular buildings

So I am thinking about making a kind of modular building for my kids' new Empire army. Wall panels, gable ends, ceiling panels. Connector pieces (both end to end and inside and outside corners), doors and windows, chimneys.

How tall do you thinkI need to make the walls for a single story? I was thinking 2 inches, maybe 2 1/2 inches.

The plan is to put a layer of sculpting clay onto a pre-cut base of either styrene or thin plywood. Call it about 1/8" thick. Then sculpt the pattern into it. Make an RTV mold of that, and cast in resin.

That's the plan. What about it? I need feedback before I get started.

Resin Minerals Painted

I bought a pair of pieces of Armorcast's resin "Pyrite Crystals" from a local gaming shop last week, and got them painted up over the weekend. Finally had time to take a photo of them and put together a few thoughts about them, especially as compared to my previous crystal project, the green 'handwavium' ones I made of carved pink foam.

My review:

• Nice quality casting.
• Good stronge yellowish beige resin
• Very little flash or pitting
• Nice lines
• Details okay, but not fantastic. Just a clump of rock crystals.
• Super easy to paint.
• Price: $5.00

What I Did:

1. First I used a sharp hobby knife to clean up the little bits of flash, mold lines, etc.
2. Then I washed the pieces with warm soap and water, rinsed and dried with paper towel. Let it sit overnight to air dry more.
3. Next, a little bit of superglue to fill the few small bubble pits. Let sit for an hour to cure.
4. Then I sprayed each piece with flat white paint.
5. Color on the rocks was achieved by using several coats of thinned Vallejo Intense Blue. Ground color was Ceramcoat burnt sienna.
6. Brush watered PVA glue on base (using 100 for $4 cheap-o plastic bristle brush), then dredge into my Mars ground mix, and let dry.
7. Next morning, two coats fo Testor's gloss, followed in afternoon by Testor's flat.
8. Will finish by brushing on a coat of water-soluble gloss onto the crystals to make them shiny.
   

Unobtainite Deposits

Yesterday I went to a game store in Houston, the venerable Nan's Too. Anyone who has gamed in Houston during the past, oh, 20 years or so, knows Nan's. The nice thing about this place is that, being so old, you can find some older stuff there. I found some older GW minis that I could use, but more to the point for this blog, I got a package of resin "pyrite crystals" made by Armorcast. Got the package for $5. Haven't compared that price to current website price, but it seemed good. Just wish they had had a couple more packages.

The plan is to turn these crystals into the wonder mineral "unobtainite" for Victorian Science Fiction. It cancels out the effects of gravity when exposed to electricity. More power, more anti-gravity.

The resin has been washed, dried and primed. Next step is to get to painting. Blue crystals, red Martian landscape. I'll put photos up when I get some work done on it.

RTV Purchased

I bought this past weekend the first RTV I have ever had.

For those of you who don't already know, RTV stands for Room Temperature Vulcanizing. It's a silicone rubber material used to make molds for casting resin, plaster, etc. It generally can NOT be used for lead - the temperature is too high, melting the mold. I believe there are some types that can handle the high heat, though.

What I got was a Smooth-On product, called OOMO 30, IIRC. It mixes in equal parts by volume (easy!). I have read good things about it on the internet, at TMP and other places. Found it at a local art supply store.

So, obviously, the plan is to sculpt up some items, make molds, and get to casting. Some of these things will be scenics related, so I thought I would mention it here. Specifically, I want to create some doors and windows to be attached to buildings, in both 15mm and 25mm scales. It is a pain to try and scratch build them each time, so I am going to try and create some good masters to cast from. Might make some railings, chimneys and such, too. Start simple before trying something ambitious.

Anyway, wish me luck. I have a nasty feeling I am gonna need it. When I get a space cleared to work on it, I'll get to work. Hopefully, pictures and such will be involved as well.

Primitive Huts

Okay, these huts are just becoming available, although they have been discussed on The Miniatures Page (TMP) for over a year.

The sculptor (whose name I can't recall off the top of my head, but who goes by the TMP handle of Cacique Caribe, or CC) finished them, oh, November of 2007 I think. Then he shopped around for someone to handle the casting and marketing and such for him, as he didn't really want to do all of that himself, but there was a lot of interest in the models.

Enter Alex Bates in Alaska, of the new Forge of Ice company. They get a deal worked out, and now, they are in production.

First, a group shot. There are four different designs:

Now a close up of one:

I have nothing to do with the paint jobs (nice work, though, especially the snow) which were done I believe by a Mr Robert Phipps of the United Kingdom, a customer of Forge of Ice and friend of Alex's. I hope no one minds me swiping the photos, but I'll remove if you want me to!

I pinched this tidbit regarding the snow effect from TMP (http://theminiaturespage.com/)

"Regarding the snow effect, Rob [Phipp] says:

I Just use a bit of PVA wood glue on the bits I wanted covered in snow, then used a white flock, then another coat of PVA and then Bicarbonate of Soda for the snow effect. You get a nice brilliant crisp white from it.You don't have to use a white flock underneath but it stops any colour from the tent from showing through if your PVA is too thin.
And that's how he does it!

-Alex"

The reviews have been most complimentary, for both sculpting and quality of the production castings. You can reach Alex through his blog, and here's a link with more info and pictures of the tents. http://forum54.oli.us/index.php?topic=5205.15